There are several reasons. 1. Reduced charges of slow burning powders will not generate enough initial pressure to expand the case to seal the chamber; this allows the gas to flow around the case and into the rifles action and possibly the shooters face. 2. Reduced charges do not fill the case and depending on the powders position in the case, may allow the force from the primer to move the bullet into the bore before the powder starts to burn. This plugs the bore and can cause a catastrophic pressure spike when the powder does ignite. 3. A load that is not adequate to expel the bullet from the barrel can cause a bulged or burst barrel if another round is shot behind it.
- Last update:
- 2013-10-31 23:02
- John Bullet
You cannot comment on this entry
- Fine-tuning bullet seating depth.
- Why is the powder I have not listed in your data?
- Why don’t I get the same velocities listed in your manual from my rifle?
- Why do different manuals have different data?
- What is SAAMI?
- What is SAAMI spec?
- Why are reduced loads potentially dangerous?
- What is the definition of “burn rate”?
- What is a compressed load?
- Why are there compressed loads (more than 100% load density) listed in your Reloading Manual?
- What is load density and how is it possible to have more than 100% load density i.e. compressed load?
- How is it possible to get over 100% load density?
Lands Barrel Break-In Competition Case Dimension Solid out of stock 22 Nosler CTBST Trophy Grade Long Range ABLR Dangerous Game Reloading Products Rifle Targets Match Grade Rifle Reloading Guide #7 AccuBond Long Range Elk Ballistics Nosler Rifles Deer Safari Long Range Ammunition Reloading Powder Sporting Handgun CC Custom Competition Defense Rifle Seating Defense Handgun Brass Ballistic Silvertip AccuBond Partition BTMZ Trophy Grade Varmint Barrels Reloading Guide BSB Nosler Cartridge find products Primer Pockets bullets Left Handed Rifles re-chamber Reloading Ballistic Tip Lead Free Muzzle Velocities Ballistic Tip
Excellence - Integrity - Service
115 SW Columbia St | Bend, Oregon, USA 97702 | Toll Free: 1-800-285-3701 | email@example.com
Nosler Showroom / Open to the Public: Monday - Friday 10:00 am to 5:30 pm PST
Corporate Hours: Monday - Friday 8:00 am to 4:30 pm PST