The polymer tip contained in Nosler’s AccuBond®, AccuBond® LR, Ballistic Tip®, E-Tip® and Varmageddon® bullets have three main functions. First, it is meant to maintain sharp tip shape and not deform which is common on lead tipped bullets. Second, because of this sharp spitzer nose, the ballistic coefficient is improved for better long range accuracy. Third, the polymer tip acts as a wedge upon bullet impact which initiates expansion as the bullet penetrates; maximizing dependable and reliable would channel destruction. The tip does not melt away from the bullet while traveling through the barrel or before terminal impact. Based on a bullet traveling 3000 fps, it only takes 1/15000th of a second for a bullet to travel through a 24” barrel so there is little time for heat to affect the integrity of the bullet in any way. Most often, the tip “washes” away along with a partial amount of the nose of the bullet during expansion.
- FAQ Home
- All categories
- Nosler® Brass
- Nosler® Rifles
- Nosler® Reloading Guide
- Nosler Catridges
- Misc Questions
- General Reloading
- Last update:
- 2014-10-08 17:45
- John Bullet
You cannot comment on this entry
- What is the difference between the Ballistic Tip® and the AccuBond®?
- What is the difference between the AccuBond® and Partition®?
- What is the difference between AccuBond® Long Range and AccuBond®?
- What is the difference between the Ballistic Tip® and the Combined Technology® Ballistic Silvertip® (CTBST)?
- What do the different tip colors on Ballistic Tip® bullets mean?
- What is the difference between the Ballistic Tip® Varmint and Varmageddon® bullets?
- Can I hunt deer sized game with the Ballistic Tip® Varmint bullet?
- What is the difference between the Ballistic Tip® Varmint bullet and Ballistic Tip® Lead-Free™ (BTLF)?
- Why are the Ballistic Tip® Lead-Free™ (BTLF) bullets so long for their weight?
- Are there any other intended uses for the Ballistic Tip® Muzzleloader (BTMZ) bullet other than for inline muzzleloaders?
- Will the Bonded Solid Base (BSB) bullet reliably feed in an AR platform rifle?
- Can the Bonded Solid Base® (BSB) bullet be used for hunting?
- Can Custom Competition bullets be used for hunting?
- Why do some of these bullets have recommended twist rates?
- What is the E-Tip®?
- Are Nosler® Solids safe to use in Damascus steel barrels?
- Are Sporting Handgun bullets suitable to hunt game with?
- Is there a difference in terminal performance between the Varmageddon® bullet and the Ballistic Tip® Varmint bullet?
- Can I hunt deer sized game with the Varmageddon® bullet?
- Why heavy bullets are better for long range shooting.
- Which bullet should I use for elk?
- Why heavy bullets are better for larger game when using lighter calibers.
- Advantages of using a Nosler Hunting Bullet
- Why target bullets aren't designed for hunting.
- Why do you list maximum and minimum velocities for your bullets?
- Understanding twist rates and bullet stability.
- Does the lead in the rear of the Partition melt when fired out of a rifle?
- Did the Ballistic Tip® bullet get redesigned along with the new packaging?
- What happens to the polymer tip in the bullet after being fired from the rifle?
Reloading Guide Loading Barrels Solid Case Dimension Sporting Handgun Lands Nosler Vertical Lines Left Handed Rifles Trophy Grade Long Range Stem Coyote Dangerous Game Muzzle Velocities Reloading Powder 22 Nosler find products Ammunition Ballistic Tip Lead-Free Reloading Ballistic Tip Muzzleloader Custom Competition Ballistic Tip Lead Free Burn Rate Match Grade Handgun Competition CTBST Muzzle Brake re-chamber BTLF Reloading Products BTMZ Brass M48 Varmageddon 30 Nosler NoslerCustom Nosler Rifles Primer Pockets Defense Rifle Reloading Guide #7 Hunting Barrel Break-In AccuBond Bonded Solid Base ABLR Ballistic Tip Varmint Partition E-Tip
Excellence - Integrity - Service
115 SW Columbia St | Bend, Oregon, USA 97702 | Toll Free: 1-800-285-3701 | firstname.lastname@example.org
Nosler Showroom / Open to the Public: Monday - Friday 10:00 am to 5:30 pm PST
Corporate Hours: Monday - Friday 8:00 am to 4:30 pm PST